DEFENSE AND GOVERNMENT
DEFENSE & GOVERNMENT
Secure & Mission-Critical Federal Facilities
Engineered, Built and Secured in the USA for the Environments That Cannot Fail
Engineered and manufactured in Phoenix, Arizona. Domestic content, documented sourcing and full component traceability support Buy American Act and Trade Agreements Act requirements on federal projects.
Project drawings, specifications and controlled technical information are handled under a cybersecurity program certified to CMMC Level 3 and built on NIST SP 800-171 and 800-172 controls, protecting your facility data from quote to closeout.
N+1 and 2N fan, coil and compressor configurations, dual power feeds and automatic failover keep critical spaces conditioned through component failures and maintenance.
Desiccant dehumidification down to -80°F dew point protects munitions, avionics, electronics and stored equipment from corrosion, condensation and electrostatic discharge.
UL508A control panels can be configured for closed or air-gapped networks with standard BACnet and Modbus integration, so equipment fits your security architecture instead of forcing exceptions to it.
Systems are designed for 24/7/365 duty in harsh climates, with robust construction and service access that minimize downtime and maximize mission readiness.
Military and federal facilities carry a different set of stakes. A cooling failure in a secure data center, a humidity excursion in a weapons storage area or a contaminated supply chain is not just an operating cost; it is a mission risk.
Air2O has supported DoD, DOE national laboratory and federal projects as part of our long-standing focus on mission-critical environments. We design and manufacture custom air handling, precision cooling and low dew point dehumidification systems in Phoenix, Arizona, and we protect the engineering data behind them with a CMMC Level 3 certified cybersecurity program. The result is equipment federal owners, prime contractors and design-build teams can specify with confidence, from submittal through commissioning.
Built for the facilities that keep the mission running
high-density compute, AI and HPC halls, including liquid-cooled deployments
SCIFs, command and control centers, operations centers and communications hubs
aircraft hangars, maintenance depots, armories and vehicle storage
controlled-humidity preservation to extend asset life and readiness
DOE and NNSA national laboratories, test facilities and controlled research environments
microelectronics, semiconductor and battery production for the defense industrial base
VA facilities, emergency operations and other continuity-of-government sites
Supporting the nation's research and security laboratories
DOE and NNSA national laboratories put almost every environment we design for inside one fence line: high-performance computing, clean rooms, wet and dry labs, high-bay test facilities and secure workspaces. Each comes with tight tolerances, strict safety requirements and rigorous procurement and site-access processes.
Air2O brings;
- Precision temperature and humidity control for laboratories, test cells and metrology spaces
- 100% outside air and DOAS systems with energy recovery for lab ventilation and pressurization
- Clean room air handling for microelectronics and materials research
- CRAH, Air2O Wall and CDU solutions for supercomputing and HPC centers
- Submittals, factory testing and documentation built for federal lab procurement and site requirements
Built in Arizona. Deployed worldwide.
Air2O equipment operates on five continents, in some of the harshest climates on earth. We support overseas installations and OCONUS projects with export-ready packaging, international logistics and on-site commissioning, so US facilities abroad get the same engineered performance as those at home.
Custom-engineered for your requirements, not adapted from a catalog
Our engineers work directly with federal owners, A/E firms and prime contractors to design each system around the facility's mission, security and site constraints. Each solution below shows what it does for federal facilities.
Custom Air Handling Units (up to 200,000 cfm)
Clean room, laboratory, hangar and general mission-critical air handling
Custom packaged DX units (up to 300 tons)
Self-contained cooling for remote sites and installations without chilled water
Desiccant dehumidification (down to -80°F dew point)
Corrosion control and preservation for munitions, aircraft, vehicles and stored equipment
Clean room HVAC and air purification
Filtration and pressurization for labs and sensitive manufacturing
CRAH units (up to 120,000 cfm) and Air2O Wall
Precision cooling for secure and high-density data centers
CDU (up to 2 MW) and 500 kW LLB
Liquid cooling for AI and HPC compute, plus commissioning and acceptance testing of liquid-cooled halls
DOAS and energy recovery
Dedicated outdoor air for ventilation, pressurization and humidity control in secure spaces, offices, barracks and labs, with heat pipe and run-around coil energy recovery to cut outdoor-air load
EcoWall EC fan retrofit
Replaces aging fans in existing air handlers and CRAHs with EC fan arrays, cutting energy use and adding fan redundancy without replacing the unit, a practical upgrade for legacy federal buildings
UL508A control panels
Integrated, security-conscious controls built in-house
Every project is supported by CFD & FEA software CFD , factory testing and commissioning support.
A partner federal programs can trust
Security does not stop at the equipment. Defense and government projects generate sensitive drawings, site layouts and specifications, and how a supplier handles that information matters as much as how the equipment performs.
CMMC Level 3 certified
Air2O holds Cybersecurity Maturity Model Certification at Level 3, the highest level in the DoD program. Level 3 builds on the NIST SP 800-171 controls for Controlled Unclassified Information (CUI) with enhanced NIST SP 800-172 protections against advanced persistent threats.
Made in the USA
engineered and manufactured at our 186,000 sq ft facility in Phoenix, Arizona.
Buy American Act and TAA support
we provide domestic content documentation and certifications (including FAR 52.225-9) on a project-by-project basis.
Documented quality
factory testing, traceable components and formal pre-delivery protocols carried over from our semiconductor clean room work.
Long-term partnership
from design assist and submittals through commissioning and lifecycle support, we stay with the project.
Ready to support your next federal project
Whether you are a federal owner, a prime contractor or an A/E firm writing the spec, our team can support design assist, budgetary pricing and compliance documentation from day one.